Robin Posted February 20, 2017 Report Share Posted February 20, 2017 Apologies if this is a dumb question but I need to replace the fuel filler seal - can I do this with the tank in place or does it have to come out in order to fit the seal around the filler neck? Also is there a correct way of positioning the seal? Thanks Robin Link to comment Share on other sites More sharing options...
Pete Lewis Posted February 20, 2017 Report Share Posted February 20, 2017 You can fit this with tank installed it can be a bit tight to get the flip through the hole a llose tank may help depends if filler tube is central in thebhole in the wing but some poke and prod will get it located use some soft soap to aid the fitting pete Link to comment Share on other sites More sharing options...
Robin Posted February 20, 2017 Author Report Share Posted February 20, 2017 You can fit this with tank installed it can be a bit tight to get the flip through the hole a llose tank may help depends if filler tube is central in thebhole in the wing but some poke and prod will get it located use some soft soap to aid the fitting pete Thanks Pete Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now