David42 Posted July 26, 2017 Report Share Posted July 26, 2017 I have recently bought a Honebourne Hard top for my1969 Mk 2 Vitesse. It is in very good condition but unfortunately there are no fixings to hold it in place with it. If there is any one out there who has the same top I would be very grateful if they could let me have some pictures of the fittings so that I can get to and make some. The two rear brackets are in a position that is over the folding hood pivot point and the two front ones are set 20mm inside the locating pegs for the front. I am sure that I should be able to make these bits, but a picture of the proper unit would be a great help. I will ale contact Houneybourne to see if they can supply what I need. I hope that somebody can help. Link to comment Share on other sites More sharing options...
AndyTV8 Posted July 26, 2017 Report Share Posted July 26, 2017 No direct experience, however I'd expect Honeybourne to be helpful if you give them a call .... Andy Link to comment Share on other sites More sharing options...
David42 Posted July 31, 2017 Author Report Share Posted July 31, 2017 All now sorted Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now