leon.halliwell Posted May 29, 2018 Report Share Posted May 29, 2018 Title says it all, I’ve got the drive shafts out for refurb and in the process of removing the hubs and vertical links the main bolt which passes through the trunnion is seized in place. I’ve tried heat, I’ve tried using an air impact gun, hammer, drill. I’m out of ideas and it needs to come out without destroying the vertical link or trunnion. Can anybody help Link to comment Share on other sites More sharing options...
clive Posted May 29, 2018 Report Share Posted May 29, 2018 Hacksaw, or grinder with thin disc to start it off. Cut through between the VL and the hub carrier, job done. And doesn't take long at all. Link to comment Share on other sites More sharing options...
leon.halliwell Posted May 29, 2018 Author Report Share Posted May 29, 2018 Excellent I’ll try that tomorrow! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now