Fraser64 Posted August 5, 2018 Report Share Posted August 5, 2018 Can someone give me some advice on how to remove the barrel from a 1500 Spitfire ignition switch. I have the whole unit removed and the bottom plate removed allowing access to the internals but cant see an obvious method of pulling the barrel out other than brute force. Any ideas would be helpful. Thanks Ian F. Link to comment Share on other sites More sharing options...
Ben Caswell Posted August 5, 2018 Report Share Posted August 5, 2018 With the key in the barrel turn to on position, then on the side of the body there is a small hole insert a small screw driver or drill bit or similar and press while pulling the barrel with the key and it should come out. 1 Link to comment Share on other sites More sharing options...
AidanT Posted August 5, 2018 Report Share Posted August 5, 2018 Ben's totally correct, you are pushing down on a sprung pin so you should feel the drill or whatever you are using push against the spring resistance. Its quite a firm Push needed Aidan Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now