grinder adaptor

[Ian Faulds]

although i dont have a lathe ,i made this adaptor for my angle grinder, i used the old wheel clamp from my old knackered  grinder and some pipe, i kept it all concentric so the wheels run true.it enables me to mount 50mm wheels to get into difficult areas. later i realized its also good for your worn angle grinding wheels and nylon stripping wheels you can get maximum use out of them. the 50mm wheels have a 10mm bore so go straight on, the 16mm holes in the larger wheels i have a spacer 16 o/d x10 i/d so i can mount these too. i know no guard i i dont recommend you trying it uness you have a lot of experience.