Herald 4-way union to master cylinder brake pipe - route?

[Colin Lindsay]

Anyone got good photos of the route the brake line takes from the master cylinder across the bulkhead behind the heater and then down the front to the chassis? In particular how it crosses the front of the bulkhead and over the front lip? In every photo that I can find, it's obscured by the coil or the engine so I need to see how it goes from chassis to vertical face of the bulkhead and where it turns the corner at the top to go under the heater. Thanks in advance!

[Bordfunker]

Colin, see if these are any help.

Karl

 

[Colin Lindsay]

3rd and 4th down are great. I'd forgotten if the pipe ran to the side ie inside the bulkhead cutout, or over the front. That clears it up nicely. Tomorrow's job, then... thank you!

(Incidentally what does the clip on the speedo cable in the first photo attach to?)

[Bordfunker]

1 hour ago, Colin Lindsay said:

(Incidentally what does the clip on the speedo cable in the first photo attach to?)

Mine is attached directly to the bulkhead via a metal strap type thing.

j

I’ll see if a I can’t find a from on pic which might be clearer.

Karl

[Colin Lindsay]

Thanks; it may not apply to the 1200 but just in case I've forgotten...

Incidentally do you have any good closeups of the starter solenoid and the route the brake pipe takes round it? I've routed the brake pipe and now the solenoid won't fit...