Peter Truman Posted July 23, 2021 Report Share Posted July 23, 2021 The distance pieces for the Reverse Gear Set Up for the 3 Rail 4 Syncro (Spit MkIV) part No.137687, and the Single Rail Gearbox's part No. 22G1435 are no longer available, so I can't obtain the 3 Rail 2137687 part, but have a spare Single Rail distance piece (22G1435) available. Can anyone tell me what the length of the 3 Rail part (137687) is, so I can make one from the single rail spare. The reason for the conversion is when I built a 3 Rail 4 Syncro J type overdrive gearbox, using a 3 Rail Gearbox Case with Single Rail internals I had to seriously modify the 3 rail Reverse Operating lever 106254 to get it to engage the gear selectors. I'm thinking this was in part due to the extra length of the single rail distance piece 22G1435, so I want to try using the shorter 3 rail distance piece to see if it permits the lever to rotate further back to mesh easier with the selectors? Link to comment Share on other sites More sharing options...
johny Posted July 24, 2021 Report Share Posted July 24, 2021 Ive measured up one from box of bits at 15/16". Definitely 3 rail but wait for a confirmation... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now