martyn wright
-
Posts
652 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Store
Events
Posts posted by martyn wright
-
-
Hi! Mike! Is there supposed to be a Rail also inside that holds the Rubber Header Seal? If so I do not have that either? Since my last message I now have the Plastic Header finisher!
Cheers Martyn
-
Hi All! Back to the fitting Instructions! Has anyone out there "Had Instructions" when they purchased a New Hood??
-
Yep! I also had to take the Hood Frame apart! Rub down and Paint it! Clean and white grease the movable parts and bend the damaged/bent parts back in line. Drill out the damaged screws in the Header Rail and fit new. Lol! This Vitesse hasn't been on the road since 1985! Put Windscreen in this morning!
-
Hi! Anyone have a photo of the Header rail Plastic seal and how it fits onto the hood??
-
Hi! I purchased New Hood from TSSC! Are the Instructions supposed to be in the box? Or Don't they come with instructions? ( The Popers where missing?) Cheers Martyn
-
Hi All! I have emailed "Chic" so just waiting an outcome!
-
1
-
1
-
-
Thanks Gary! I don't even know what one looks like! Again my Hood and Frame disappeared when it went into storage at Hereford, so I managed to get another frame but found that this piece was missing? I need to get a photo of one from somewhere to see if I can improvise! Cheers again!
-
Hi! I am looking for a Finisher Hood Header Rail 609602?? Cheers
-
Thanks! Just picked a set up from the store!
-
Vitesse 1600/6 Well I managed to get a Used Hood Header Rail! BUT! the slotted screw have been drilled then the tops ripped off?? What is the best way to get the screws out as they are able to move back and forth within the slot?
-
Got mine 2 years ago from Canley Classics!!
-
Hi! My 1966 1600/6 had the small counter sunk screws also! as shown above! I have not seen those clips tho!
As the screws no longer fit the hood frame so, I am thinking of using the 1/8" pop rivets
-
Hi! Try Ally! At East Kent Trim - Ashford, Kent 01233 500280?
-
1
-
-
Thank You Kind Sir!
-
Hi All! I have managed to get a Photo of the "Header Black Facia Board" where as you can see the Hood Catches screw into? I need the "Facia Board" or a old one I can take a Template from??
Cheers Martyn
-
Okay! Still no answer from Spitbitz! There's a well worn pale blue herald on ebay and on close up I can see that it has a black facia on the header rail! ?? That is what Im after! Can anyone help!! Cheers Martyn
-
I Found one Thanks all!
-
Sent an email to Spitbitz asking for a board!
-
Hi! The Hood Frame Facia "Board" that fits into the Hood frame (563132)The Securing Catches fit onto is missing on my Vitesse 6! does anyone know where I can get one or get a Template please?
Cheers Martyn
-
Hi! I saw the same type? on ebay yesterday!!
-
Hi! Yes! Missed a few on Ebay over the past couple of months lol! I purchased 2 x Plates and 1 x Hook so far! Yet another item that never came back from the Restorers! Thanks anyway
-
Hi! Anyone have a 1 x Anti Burst Lock Hook? Only need One have all other parts!
Cheers
-
Hi! There are 2 x End Trims on ebay at present!
-
I like the TSSC Badge Pete!
Vitesse Hood Fitting Instructions
in Bodywork & Fittings
Posted
Hi All! The Retainer Screws for the Alloy Weather and Rubber strip are showing as PTO 453 but are discontinued? But there is no info on what Size etc they are? Can anyone help please?
Cheers Martyn