Jump to content

Josef

TSSC Member
 View Profile  See their activity

  • Posts

    1,656

  • Joined

  • Last visited

  • Days Won

    14

 Content Type 

Posts posted by Josef

  1. MK3 Spitfire carb upgrade

    in Engine

    Posted

    Have you got an FD prefix engine number? It should make 75BHP in standard tune, and it’s a nice revvy engine, mine certainly feels fast! Would be worth checking the carbs, dizzy etc for wear, and perhaps measuring the cam lift to make sure it does have the expected Mk3 cam fitted. Plus a good tune up, best thing I’ve ever learned for making the engine more performant is doing the timing by feel and road test!

  2. Herald 13/60 Resto + Auto Conversion

    in My Triumph Restoration Project

    Posted

    15 hours ago, Richeee said:

    Not sure how many quaterlights a 2 door car needs

    Four of course, then you’ve got one whole light :D

    Glad to see the door skins are looking like good pressings. I had a bad one… They all come from the same place, and the supplier was very reluctant to accept that one could possibly be wrong, despite photographs showing this was the case. Luckily Mick Dolphin had a NOS one which solved the problem for me (and I got a refund on the original eventually) but I was concerned that this was another thing we were only getting in crappy quality.

    With the sills, even NOS Stanpart ones, be aware that they may also require some modifications to fit, so don’t topcoat them immediately! I was surprised there, but it’s the old 50 year old wonky body wonky chassis problem. For anyone looking for sills the modern repros looked pretty comparable to the NOS one I had:

    Adjusting the Sills to Fit - NOS Versus New | 1970 Triumph Herald 13/60 | Part 15
    https://youtu.be/1is9d95_ZvY
     

  3. The embarrassing Herald restoration thread - and some unexpected wrist action...

    in My Triumph Restoration Project

    Posted

    Well I know everyone here would be thrilled to see the estate on the road again (for you and the car!) even if we might not see it in person. 

    I’ve used Safety Belt Services of Bedford before, they were slightly more expensive than Quickfit, but the latter gave me over the phone without VAT and didn’t indicate that this was the case at all… So the difference in the end wasn’t huge.

    • Like 1

  4. Do you M.O.T. Test your Classic

    in General

    Posted

    On 22/01/2024 at 12:10, Gary Flinn said:

    If I could get it at the right price I would find the time for sure, I've tried to work out what it would cost me in parts alone and it's adding up to at least £3K I reckon, maybe more if the Engine block is scrap.

    Gary  

    For reference my Herald engine rebuild has just cost about £1.75k in parts and engineering work (well, still not managed to start it yet so hopefully we can stop at that figure!) That includes a Distributor Doctor dizzy rebuild which was not cheap, but hopefully worthwhile.

    • Like 1

  5. GT6 MK1 door alignment

    in Bodywork & Fittings

    Posted

    Those gaps are looking pretty good! Yep you’ll need to add to the lip on the edge of the floor, the sills also need to be fitted slightly under tension though (you push up slightly on the lower edges) so take that in to account too when adding your floor lip.

  8. GT6 MK1 door alignment

    in Bodywork & Fittings

    Posted

    Yeah if you’ve got it that far apart you’ll be able to make it fit. At this point if it looks right, it is right! You can only buy the whole b-post striker / transition panel, so I’d just make up bits to do a neater job than you’ve inherited. What you have is similar to how my driver’s side had been treated and that was an easy enough repair when I had a few months fabrication experience and pretty much no proper tools. (Even if you did buy and cut up the panel, you’d almost certainly find yourself modifying the area in question anyway.)

    Look forward to seeing how it progresses.

  9. GT6 MK1 door alignment

    in Bodywork & Fittings

    Posted

    Oh dear. Been there, done that. Mine was worse though! Rimmer’s are fine, but they’re almost always the most expensive option. I’d buy the ‘genuine’ sills (British Motor Heritage) from Canley Classics, James Paddock or similar. I’ve had one of these next to a Rover branded one from the 90s and they’re the same beyond some visible wear in the tooling. Still expect to have to cut it up a bit to get everything looking right though. You may want/need to adjust the fit of the rear wing where it meets the sill too as the root cause of your door stick out may well be that area being too far inboard. Aaaaand, if you find you need to make any repairs to the b post section in the door shut, don’t buy that panel, it’s junk, the pressing for the striker is too shallow so you’ll not be able to shut the door, also been there and also done that… (Doesn’t look like you’d need to go that far, but I wanted to get that warning in just in case!)

  11. Herald 13/60 Resto + Auto Conversion

    in My Triumph Restoration Project

    Posted

    I’d be inclined to agree that you should not weld up the bonnet till you’ve got the rest of the body ready to check it against. Looking good though! 
    Skinning doors is relatively easy compared with some other bodywork jobs! If you’re using one of the skinning tools you just need to be aware that you can push it in to the face of the skin if you’re not careful with how it’s aligned. Also, check your skins carefully when you get them. The modern one I bought (Fitchett’s via the club shop) was not straight along the top, and the body line was not pressed all the way along the door…

  15. The embarrassing Herald restoration thread - and some unexpected wrist action...

    in My Triumph Restoration Project

    Posted

    On 01/12/2023 at 08:45, AlanT said:

    There are very few on this forum at the moment

    Well, some part of the lack of resto posts is related to the club’s changes to photo hosting allowances… Part of my reasoning for starting posting more to YouTube than my threads on here though is that the cars will then have a chance of reaching a slightly wider audience, and perhaps show more people that home restoration is a viable thing. 

    • Like 1

  17. Compression test

    in Engine

    Posted

    Well your highest vs lowest readings are 10% separated, as Pete said above you’re looking for a max of roughly 5%. Do you get consistent readings though? If you’re not familiar with the process I’d do three readings per cylinder. If you get consistent readings per cylinder you can be confident of the reproducibility of your method and therefore confident that you’re seeing a real difference between cylinders. 

  22. Coil

    in Electrical System

    Posted

    2 hours ago, stebec said:

    I take it I just need to separate these 2 pipes and reconnect them to the Valve,

    Yes. As others have said though I’d bet on it leaking / being blocked. Not sure why someone would bypass the heater to be always on though.

    • Confused 1

  23. Coil

    in Electrical System

    Posted

    I agree, but there’s mains electrical cable visible in that shot of the battery which doesn’t speak well to the quality of previous maintenance so it definitely wants some serious investigation and improvement…

  24. Coil

    in Electrical System

    Posted

    Graham you’re correct about the colours.

    Steve I also notice your heater valve is bypassed, that could get uncomfortably warm and won’t help your cold starting. The valves are often fixable if it leaks, and the Smiths type cheap enough to replace regardless.

     

     

×
×
  • Create New...