daverclasper Posted February 14, 2023 Report Share Posted February 14, 2023 Hi. I would like to be able to pull dash out a few inches to spray electrical connectons with electrical grease to preserve against corrosion. I have removed the front facing screws, though appears to be still fastened around the glove compartement area. Cant find any detail in my manuals. Any info please Ta, Dave Link to comment Share on other sites More sharing options...
johny Posted February 14, 2023 Report Share Posted February 14, 2023 Page 5.232V in the workshop manual shows an angle bracket that joins the facia to the glovebox and its screws have to undone in the roof of the glovebox to allow separation Dave. Link to comment Share on other sites More sharing options...
daverclasper Posted February 14, 2023 Author Report Share Posted February 14, 2023 Thanks Johny. Will have a look at FWM. Are the screws accessed within the glovebox do you know?, or do you have to go under the dash? Link to comment Share on other sites More sharing options...
johny Posted February 15, 2023 Report Share Posted February 15, 2023 Theyre in the roof of glovebox accessed through its door. Needs a stubby screwdriver to fit in the box and then used vertically upside down... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now