Sandy Gibson Posted February 22, 2023 Report Share Posted February 22, 2023 Afternoon all Just refurbished my gear selector but now when I depress the gear lever to select reverse, the pin won’t clear the stop in the casing to allow the lever to the reverse side. Can’t see what I’ve done wrong and I’ve gone back to the original spring and nylon cup but still won’t work! I’m sure I’ve got something wrong somewhere but can’t see it! Anyone got any ideas? Thanks in advance! Link to comment Share on other sites More sharing options...
Pete Lewis Posted February 22, 2023 Report Share Posted February 22, 2023 Oops!! you have the spherical ball upside down Pete 1 Link to comment Share on other sites More sharing options...
Sandy Gibson Posted February 22, 2023 Author Report Share Posted February 22, 2023 Thank Pete I would now like to remove this post and pretend I have never seen it!!!!!!!!!!! Link to comment Share on other sites More sharing options...
Pete Lewis Posted February 22, 2023 Report Share Posted February 22, 2023 dont worry there are more Tee shirts often won before the forums arrived getting the blasted circlip off is a good start there is no such thing as a daft question we are all here to help Pete 4 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now