trevorc Posted February 23, 2016 Report Share Posted February 23, 2016 Please can any 1200 owners confirm how the two grilles are fixed to the surround and how the surround is fixed to the top flange of the front valance. I'm sure the grilles are fixed using pan head self tappers in spire clips, but what size screw? For the four fixings at the bottom of the grille surround the parts book mentions a cage nut, but I can't find a supplier, I think I've seen these also fixed using self tappers in spire clips. Any knowledge? Or photos? Link to comment Share on other sites More sharing options...
mishmosh Posted February 24, 2016 Report Share Posted February 24, 2016 Will take a look. But iirc 1/2 inch x. 8 pan heads should do it. In a captive spire clip Link to comment Share on other sites More sharing options...
Colin Lindsay Posted February 26, 2016 Report Share Posted February 26, 2016 The bottom of the surround sits on the front valence and is secured by small bolts into caged nuts; however any similar sized self-tapper will do and you can use modern car plastic trim clips which will push into the caged and work like a rawl-plug. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now