SprintAstic Posted September 30, 2016 Report Share Posted September 30, 2016 Hi all, this is a Sprint engine with the pre-engaged starter - got the car 2 years ago and occasionally the starter would stick without turning the engine; usually ok if doing the usual rocking to and fro in gear. Never had a problem once warmed up and still fine. Now it needs attention as it rarely turns on a cold engine and rocking doesnt always work - lucky the garage has a long slope outside !!. I suspect a solenoid contact issue, hoping not ring gear .. anyone got experience of similar problems & solution ? Cheers, Alan. Link to comment Share on other sites More sharing options...
Pete Lewis Posted October 1, 2016 Report Share Posted October 1, 2016 a good clean sounds a plan , the pre engaged can suffer from build up of crud on the spindle the pinion has to fly up or corrosion in the piggy back solenoid Pete Link to comment Share on other sites More sharing options...
SprintAstic Posted October 5, 2016 Author Report Share Posted October 5, 2016 OK thanks Pete. Its gotta come out one way or the other so hope a good clean up will do the job. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now