Paul H Posted October 4, 2016 Report Share Posted October 4, 2016 Hi , I have changed UJ's & Rotoflex , and started reassembly The bearing carrier came off easy enough but is proving more difficult to go back - A buddy has a press which I can use , Before the pressure is applied does this pic look ok in that its in the correct place Thanks in advance Paul Link to comment Share on other sites More sharing options...
Gary Flinn Posted October 5, 2016 Report Share Posted October 5, 2016 Did you have any of the Spacers fitted that set the Pre-load/End float on the bearings? With the Rotoflex set up it's vital this is set correctly or you are likely to ruin the wheel bearings The Canley Classsics Website tells you how to set up the Endfloat correctly if you fit new bearings or if you want to check the existing is correct. Shims are available now too I believe? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now