Too much negative camber

[Kevinrpayne]

Suggestions required please.  I swapped out my rear spring on the GT6 some years ago because it was lop sided and bought a Rimmer version. When fitted, we never managed to get to slight negative camber even after leaving two paving slabs in the boot over winter and fitting a spacer block.  Driving was horrendous.

I was convinced to get One from jigsaw but now, without a spacer block It’s overly negative and the gap between the exhaust and the road is little over 2 inches ! 
I don’t think i can find a way to stiffen the spring but can anyone recommend a spring supplier that I can go for yet another replacement as I can’t drive like this

 

thanks Kevin

[Clive]

Maybe swap leaves between the 2 springs.

However, the poor road manners could be down to th erear tracking. If that is out it can make driving very "odd" but is easy enough to check/measure.,

[Kevinrpayne]

Thanks Nigel.  Unfortunately I moved home so had to dispose of the old spring else I would have done that and next time I’ll keep the old one for safety

kevin
 

 

[Gadgetman]

If you want a new spring get one from Canley’s as mine was excellent quality and made in the UK

[Kevinrpayne]

Thanks. I’ll try them. Kevin