Jump to content

In the boot panels!


Recommended Posts

Those boot corners are available, but the other area is probably a case of home-made or possibly Chic Doig still makes them he used to make almost every section on request so might be worth a try? He has downsized now so might not have the same services as before, but he also supplied the boot corners I used in the photo below.

tub6.thumb.jpeg.70d62eadc485cc27862554a1fece4209.jpeg

Link to comment
Share on other sites

The boot reinforcement corner bracket Chic Doig sells is very different from the original. I bought one and then made my own instead. There’s a template of the required shape and photos of work in progress in this thread if you’re interested. The actual floorpan bits are mostly relatively simple curves and angles so easier to make than buy IMO!

Link to comment
Share on other sites

Thanks Josef, some good pics,can you advise on what gage of tin sheet to best use in this area, as I will have a go at fabricating the areas! First.

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...