mark powell
-
Posts
884 -
Joined
-
Last visited
-
Days Won
16
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Store
Events
Posts posted by mark powell
-
-
Makita for me too. Bit of a mix, 36v Lawn mower (2x 18v), 18v Strimmer, 18v Tyre pressure tool, 18v SDS drill, 18v circular saw, 14v grinder, 2 x 10.8v impact drills, 1 x 10.8v drill, 1 x 10.8 v jigsaw, 1 x 10.8v reciprocating saw. All Li-on. Plus 2 old 18v Ni-cad Drills.
A bit set in my ways maybe.
-
Fix It Again Tomorrow.... Quite fancy an X-19 though. My last Fiat was a 1959 600 transformable. (sun roof to everyone else!)
-
£15 for my Trackrite at an autojumble last year... Result!
-
-
Temporarily block off the heater air inlet to exclude that possibility? The only fumes I get in my Herald pick-up come through the aftermarket gear lever gaiter when a slight oil weep from the gear box heats up on the exhaust.
-
2 hours ago, ahebron said:
Hi Peter
I never thought of smearing with copper grease, I will definitely give that a go.
I bought a bag of '3m' wheels for my dremel that I use to clean the bullets before they go back in, all the ones I fit are soldered as the crimp tool is expensive and my bullets I believe are the solder type.Thanks for your concern we are directly over the harbour from Wellington City. The earthquake was a good one (6.0) but as it was deep and out to sea it didnt cause any damage. They used to terrify me but ever since Kaikoura I just accept them, we where in Hastings when that one struck and it is 250 miles away and it sacred the bejesus out of me. It woke us up and standing up was not easy, I opened the door to the motel unit to see the pool surge out under my Range Rover parked next to it, power lines arcing in the distance it was something else.
Rain was heavy in Wellington with localised flooding and slips but nothing out of the ordinary and Wellington is used to winds so we just did the usual and hunkered down till it passed over, funnily enough the summer Wellington has been the place to be in NZ.
The 2 cyclones bought floods that are devastating and the country has never seen destruction like it, the main food bowls of NZ have been wiped out but the thing is they are the food bowls because of the silt that the rivers spread across the plains. Northland, Auckland, Coromandel, East Cape, Hawkes Bay have been hammered with Waikato, Bay of Plenty, Wairarapa and Manawatu suffering localised damage. The forestry industry has a lot to answer for as the slash that has come down the rivers has destroyed everything in its path. This will cost many billions to put right and I imagine like Christchurch Redzone homes will not be rebuilt in certain areas. I am pretty sure friends and colleagues have lost houses but have no way of finding out and to be honest they have a lot to deal with without letting people know.Sorry about the rant.
Every time I read of NZ's floods and slips, puts me in mind of this..
-
I used 2 aerosol tins on my pick-up chassis. Bare chassis and summertime, so was able to rotate chassis to get full coverage. Extra 10mm holes drilled for access and stoppered after. Still had some left for bodywork crevices.
-
I have a used tank. located near Eastbourne. I think it came out of a 948. I can't see which tank fitting it has, as it's up on a shelf. Not sure of condition. Free to collect.
-
Original scissor jack has a hole in the 'saddle' to locate over the body mounting bolt heads where the outriggers meet the side rails.
-
Following on from my original query, I have gone down a different route. The gungy wheel from the pick-up has been removed and replaced with the wheel from my Midge which has the 'cheap' binding type covering. It never looked good in the Midge anyway.
The gungy wheel has been cleaned with solvent cleaner and allowed to dry. A purchase of jute twine (£9.99 from Amazon) has resulted in a nice bound wheel to complement the style of the car. The ends were tucked under and twisted into the binding and loose ends carefully cut off. A coating of exterior satin varnish was allowed to dry thoroughly and then lightly sanded to remove any 'stringy' bits.
I won't know what it will be like to 'handle' until we have moved and the Midge is released! I am well pleased with the look though!
-
Can't think why they have not been binned. It's that "they may come in useful for something" syndrome.
-
Still got two of those handbrake adjusters lurking somewhere...
-
SWMBO would love an electric tailgate. She has arthritic shoulders. I have already installed a linear activator to the upper side door on the horsebox, but draw the line at converting the Renault Scenic!
-
No angle grinder or MIG in sight...
-
Apologies to anyone who has viewed this Herald restoration in Pakistan before, but some of the panel beating skills are awesome. With basic tools only! I tend to scroll down to the photos and pick up the commentary.
- 1
-
Thanks! Well found.
-
6 minutes ago, Chris Longhurst said:
Hello Mark - do you recall if there was any text (previous/next Page) to go with the picture & if so do you have a scan?
What magazine was it in - the file title of your pic. suggest 'cutomstreet' or similar from July 84.
Many thanks - Chris
Sorry Chris, what you see is all I have. Scanned some years ago and all magazines since disposed of.
- 1
-
-
It also appears to have the later 13/60 / Vitesse bonnet,. Was there another coupe?
-
-
-
11 hours ago, Peter Truman said:
The small chassis cars have a similar bracket I found one a spare Spitfire front suspension set up I have the chassis brackets where the welded/stamped in bolt/stud was severely corroded, ie wasted so had to replace the whole bracket, on these cars they are also only a one bolt mounting!
Got the T shirt...
- 1
- 1
-
3 hours ago, Pete Lewis said:
its an old triang with coarse wheels so stays on well while cleaning i just added some meths to the felt pad and yes worked well
there are so many various ones available some self powerd at £70ish i only paid peanuts and its been a good experience so far
I feel a lot better in getting a smile for a few minutes with coffee and watch it get pushed and pulled round the tracks
Pete
I had one of those back in the day! My Mum gave away all my model railway when I was away as a student at art school, as she thought I was too old for it! Not a popular move...
-
No motivation for anything here.. Garage full to the gunwales with Midge and lawnmowers etc, as we are still waiting on selling up and moving. Herald Pick-up has occasional use for tip runs. No enthusiasm for anything at the moment.
Horrible noise from drivetrain
in Drivetrain & Rear Axle
Posted
That could be a good shout! Loose spokes would jingle and wheel would wobble. Why didn't I think of that possibility?