Dick Twitchen
-
Posts
849 -
Joined
-
Last visited
-
Days Won
8
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Store
Events
Posts posted by Dick Twitchen
-
-
Aidan, Agree with Colin's comments re the end plate, and I also did not appear to have had a problem. I bought my stand from Machine Mart many years ago. Dick
-
Paul. To elaborate on Colin's response, a Mk1 GT6 gets v warm inside v easily, that's why you rarely see a driver without a damp patch on his back in anything more than freezing weather!
-
When I did this on mine 10 years ago I used some Demon Tweaks 5mm universal ones; their part nos then was GRYSP12. Also, I would recommend changing the studs to Freelander ones; there are threads on the Forum about this mod.
.
-
Rather than just experiment, if you take the car to a paint factors they can match it up, and either identify the colour or make a small batch up (but that can cost). The latter approach may be needed if the 'original' paint has faded/discoloured over time and a touch-up is all that is required (works on old Land Rovers). On a modern needing work very often the filler cap cover is a good starting point, hopeless in our case.
-
Paul,
Overdrive would have been an option, and the heater was a special order item on the Mk1 (WHY!), but John Thomason's 'Guide to Originality' would indicate standard fit on the Mk3. Mine also had a long delay between build date (21 Nov 67) and first registration (1 Jan 69).
Dick
-
I had a similar sort of 'rocking' on my column and as well as replacing the tired spacer (609639) placed a small strip of rubber matting between the lower clamp (619850) and the column. This provided all the grip that was required.
Dick
-
Pete, Not sure where you are but I used these people to sort my seats some years ago. No problems encountered, and no connection with the company. They do a variety of work, including both classics and bespoke stuff for the hot rod community. Dick
-
But to really keep the thread drift moving away from Maplin, it seems that the cleaning lady is also to blame, and more so than thought before.
https://inews.co.uk/news/environment/household-products-revealed-major-source-pollution/
-
It may be worth contacting the gearbox/diff guru Mike Papworth, EMail probably better than telephone and details are in the back of The Courier. Nothing ventured, nothing gained.
Dick
-
Mike,
Albeit 12 years since I restored my GT6 I would thoroughly recommend Jigsaw's product; unlike the three attempts I tried from a very large supplier it fitted first time and has been fine.
Dick
i
-
Dan, Looking at the Canley Classics parts diagrams the Spitfire MkIV regulator 'looks' the same. The fact it gets tight suggests having a look to check things like the guide channels and control arms have not been distorted thus producing a misalignment. Dick
-
Cuthbert et al clearly now residing across the pond in Trumptown.
-
'Time for bed' said Zebedee; 'No way' (or words to that effect) said Florence.
-
Richard,
Can offer my strongest recommendation for Mark Field at Jigsaw. They may be slightly more expensive but if Mark uses those pieces that is good enough for me and he was a ready fount of knowledge and support when I hit the odd snag rebuilding my GT6, with rapid responses to EMails.
Dick
-
1 hour ago, Colin Lindsay said:
Anyway a metre is a musical term, so do we drive along in time to the music?
What shall we do with a ........? This is the original French spelling, as opposed to the Americanism of Meter, perhaps now moving into a thread drift discussion on Multi Meters, or hopefully not.
-
But when is a mile not a mile? As we know, or most of us, a statute mile is 1,760yds but afloat a tactical mile is 2,000yds and a nautical mile is 1 minute of latitude, which varies where you are relative to the equator and North or South Poles. 'Johnny foreigner' still uses nautical miles for distance but we all tend to measure depth in Metres, although some charts still use Feet and failure to check the chart annotation can be problematic! A bit like checking which datum is in use for your GPS position, which must be 'true' but when was the chart produced and using what method.
Still, this cold weather means a tot of rum is socially acceptable to keep warm.
-
Tom,
If you put 'car covers' in the Search function there have been several threads recently on this one, and the Club shop sells them.
Dick
-
In response to Gully's comment on a 'trusted trader' scheme unless my memory is playing tricks (age) we did used to have something similar but I seem to recall that there was much debate on potential litigation issues so it was dropped. Now it is more 'personal' rather than looking like 'official' TSSC sanctioning.
Dick
-
I bought seat foam and covers from the club shop and had a car trimmers fit them for me; they were most complimentary about the quality.
Dick
-
The Club shop sells them.
-
Andrew,
It is sign of the times because 'we' are not the target audience; the same charge could be leveled against house renovation, boat restoration etc. Interesting but everybody on here has a 'specialisation', if 10-20% of media reports are incorrect in that area, cumalatively what faith do you have in the rest.
Cynically yours, and do not get me started on USN collisions,
Dick
-
Doug, I think you mean 'patois' not 'fatwah'. Oh,dear where is this going.
-
When you find the scuttle bolts make sure you try and get plenty of easing fluid (Plusgas) in there if you can; if needs be by running it down inside the frame. Depending on how and when it was assembled and how much corrosion there is you may find the captive nuts are not secure and tear out of the frame. Welding in new ones will be required but is feasible (T-shirt owner).
Dick
-
F&F, I think the irony of my last post was lost in translation. I am sure like most things concerning IT usage it is not difficult but you 'do it as a day job' clearly indicates expertise, knowledge and experience in the field that is probably outside the volunteers on the CoM. If this is something to proceed with, and I feel it probably is, then they will need support to avoid stumbling around learning on the go and reaping the reward of condemnation if things go awry.
- 1
Exhaust Manifold Leak Mk1 2L Vitesse
in Engine
Posted
My last one came from Mark Field at Jigsaw Racing and has been fine; and with a tubular manifold that probably flex's more than a cast one. Along the line of Dave's comment he uses them on his cars.
Dick