[Can’t remove track rod ends]

Have tried this Colin no movement at all tried heat and plusgas as well Amy more ideas ?? 

[Can’t remove track rod ends]

Trying to replace the track rod ends by hook or crook 

[Can’t remove track rod ends]

Hi Tony taken some photos below hope this shows the problem .Have previously cut the steering arms off to be able to dismantle the rest of the suspension!!!!!!

maybe should have undone them before hand 🥺hind sight is a wonderful thing 

[Can’t remove track rod ends]

Update need to get a bigger spanner for the inner nut not sure of the size ?? 

If not I suppose I could cut the locking nut off them the track rod end will come off ???

[Steering arms ?? Which one is which ??]

All sorted I know which one is which thanks for your help 

[Can’t remove track rod ends]

The adjuster nut end is the other end easier to undo then sort it out on a bench ??

[Steering arms ?? Which one is which ??]

It’s power steering Pete 

[Steering arms ?? Which one is which ??]

I am now replacing the front suspension on a Truimph 2000 mk 2 

not sure which side is left and right on the steering arms is drivers side lhs or rhs 

Also not sure where they go back onto strut think one end goes on back of stub axle then not sure

any ideas 💡 

[Can’t remove track rod ends]

Hi I am trying to change the track rod ends on a Truimph 2000 mk2 

i have had to remove the track rod ends with a grinder but I can’t undo the nut I have tried heat and plusgas 

Any ideas what to do ???

[Calliper bolts]

Thanks for all your help and answers 

so to get the strut off with carrier ,calliper etc undo the top three bolts at top then not sure what else to undo to get this off haven’t really done this but am gonna try !!

[Calliper bolts]

Quick update use a blowtorch bottom nut came undone but top one still not out cant get anything behind it at all tried everything  so I now think I might have to take the whole leg off is this quite easy ??? Never done it !!!

[Calliper bolts]

Quick update use a blowtorch bottom nut came undone but top one still not out cant get anything behind it at all tried everything  so I now think I might have to take the whole leg off is this quite easy ??? Never done it !!!

[Calliper bolts]

Firmly bolted up still

[Calliper bolts]

Trouble is can’t get anything behind the head to lever it 

[Calliper bolts]

Yes Colin so do I !! Top one turns quite freely both ways bottom one have tried wd40 etc over a few days will try some heat thanks for your help 

[Truimph 2000 timing query]

Ok thanks guys for all your help 

[Truimph 2000 timing query]

Sorry 1973 Mark 2 

[Calliper bolts]

Got one side off ok started on the other side bolts stuck fast !!!

got the top one loosened but now it won’t come out just turns both ways without coming out any ideas how to get it out and what damage 

bottom one won’t turn at all 

Any ideas 💡?? Thanks Mark 

[Truimph 2000 timing query]

Hi am starting to get my project up and running have got the engine running after 10-12 years in a garage 

it has a high lift cam fitted so wondered if anyone knew what the timing should be ??? 

Have it set at about 25 degrees BTDC at the moment runs ok ??

thanks Mark 

[Recommissioned brakes]

Hi Tony  just ordered one thanks 🙏 

[Recommissioned brakes]

Hi just asking a few questions regarding my 2000 which I have stripped the back brakes and cleaned the front after not being on the road for 10/12 years 

 I was going to replace flexible hoses all round ,new cyclinder  on back wheels and buy a  calliper repair kit but discs are £82 on Rimmers each.Do any other work as well ?? or other places to try ?? 

Normal hoses or braided ones ?? 

Thanks Mark 

 

[Truimph 2000 cyclinder head washers]

Thanks again Pete 

[Truimph 2000 cyclinder head washers]

Thanks Pete that’s a great help 

[Truimph 2000 cyclinder head washers]

It's a 1973 Truimph 2000 mark 2

[Truimph 2000 cyclinder head washers]

Hi have taken the head off and now putting it back I have some large wide washers and some narrower ones can't remember which ones go where can anyone help