Jump to content

Paul Amey

TSSC Member
 View Profile  See their activity

  • Posts

    241

  • Joined

  • Last visited

 Content Type 

Everything posted by Paul Amey

  1. Paul Amey
    Thank you.
  2. Paul Amey
    Thank you
  3. Paul Amey
    So, on Paddocks web site, headlamp loom BAU2110 just does the Headlamps where as JPV 575 Headlamps Bonnet Harness perhaps does the side lamps and indicators too?
  4. Paul Amey
    Which is cheapest, new Bezels (about £16 each) or rechroming?
  5. Paul Amey
    Thanks.
  6. Paul Amey
    Thanks
  7. Paul Amey
    Right, thank you.
  8. Paul Amey
  9. Paul Amey
    The Rimmers web site lists two headlamp wiring looms for the Vitesse MK 1 . There is a choice between no pilot and with pilot. Am I right in assuming this refers to the main beam warning lamp ?
  10. Paul Amey
    Hi, yes it was nice to meet you at the Sitwell Arms.
  11. Paul Amey
    I saw the advert for Stafford in this months Courier and it reminded me to buy tickets. I was just about to order them when I bumped into Colin from Derwent Valley at a pub classics evening this evening and he told me the bad news.
  12. Paul Amey
    Again, thank you very much. I believe the white wire goes to the coil positive side.
  13. Paul Amey
    Now, at the Alternator are three terminals together two wide one's and a normal small one. All male spade connectors.On the loom are three cables, Brown with yellow tracer , large female spade connector.Brown with green tracer, small female spade connector and white with small female spade connector. Do you have instructions for this end as well please?
  14. Paul Amey
    Thank you very much. That is really helpful.
  15. Paul Amey
    Thanks for that, it's the wiring conversion I need to study.
  16. Paul Amey
  17. Paul Amey
    Argh, ok thanks.
  18. Paul Amey
    I thought I'd ask for advice on here first.
  19. Paul Amey
    Does anyone have knowledge and/or wiring instructions for converting from Dynamo to Alternator on a MK1 Vitesse please.
  20. Paul Amey
    Right thanks, yes I have got the route correct except for the hole beside the floorpan . This may have been welded over.
  21. Paul Amey
    What route is the wiring loom to the rear of the car supposed to take to get into the boot on a Vitesse mk1? I've ran it down the NS inner sill and into the rear wing behind the rear seat panel card. I was expecting a grommet hole to thread it through.
  22. Paul Amey
    Thank you
  23. Paul Amey
    Brilliant, I'll contact Mick next week. Thanks
  24. Paul Amey
    Thanks Pete. It does indeed seem to have the clip with it.
  25. Paul Amey
    Has anyone got the spring clip that goes inside the top steering column bracket please. Part number 609639.
×
×
  • Create New...