Alan Crook Posted January 12, 2016 Report Share Posted January 12, 2016 Happy New Year to all. just purchased a new vented rubber seal for my mk 4. Not had a good look at it yet but is there some kind of pin or clip behind the spring in the cap . A bit of advice always makes life easier . Thanks. Link to comment Share on other sites More sharing options...
Pete Lewis Posted January 16, 2016 Report Share Posted January 16, 2016 Dont see any detail about your cap but in general many have a pin or bar to hold the seal cap in place under the tension of the spring so it all dosnt fly apart when opening if you remove the pin I guess it will ping apart Pete Link to comment Share on other sites More sharing options...
Alan Crook Posted January 18, 2016 Author Report Share Posted January 18, 2016 Thank Pete . Bit to cold for the garage at the moment .As soon as it warms up will have a closer look ,Thanks. Link to comment Share on other sites More sharing options...
AtRo Racing Posted February 12, 2017 Report Share Posted February 12, 2017 If your gas cap seal still leaks after replacing it and the spring is not bound up the best fix I have found, gor my GT6 MK3, is to just glue another seal over the first one. I have tried every seal made and availble form the UK and the USA and they are not thick enough to seal the factory fuel pipe when going around courners. The above is a simple cheap fix. Robbie Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now