Iain T Posted June 16 Report Share Posted June 16 (edited) 31 minutes ago, Kevinrpayne said: Ok great, sorry I missed that point, I’ll go for 0.1 and give it a go. No as you have already skimmed your head measure the thickness first or tell the machine shop to make the thickness 3.3" Just taking off 0.1" you may be taking off more than you want. Edited June 16 by Iain T Link to comment Share on other sites More sharing options...
johny Posted June 16 Report Share Posted June 16 No Iain thats the shim thickness for the pedestals😁 Link to comment Share on other sites More sharing options...
Iain T Posted June 16 Report Share Posted June 16 (edited) Sorry, I've lost the plot! Where's the rum.....🥃 Edited June 16 by Iain T Link to comment Share on other sites More sharing options...
Pete Lewis Posted June 16 Report Share Posted June 16 ive drunk it Pete Link to comment Share on other sites More sharing options...
Iain T Posted June 16 Report Share Posted June 16 Cheers! Link to comment Share on other sites More sharing options...
johny Posted June 17 Report Share Posted June 17 21 hours ago, Kevinrpayne said: Ok great, sorry I missed that point, I’ll go for 0.1 and give it a go. I have the old push rods in the box of goodies, I’ll compare and report back if it makes any difference to the running thanks all kevin Thinking about it 0.1" will probably be too much Kevin as the rocker is roughly the same measurement from the pedestal to each tip so when the pedestal is raised the valve end stays where it is and the pushrod end will go up by about double the packing thickness. Obviously the less you go up the less of an angle from horizontal the rocker will sit at... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now