Darren Groves Posted October 30, 2016 Report Share Posted October 30, 2016 What would be the target CO reading when adjusting the carbs on a MK1 2L Vitesse Link to comment Share on other sites More sharing options...
Pete Lewis Posted October 31, 2016 Report Share Posted October 31, 2016 There is no spec in the manuals (not that I can find) the last gt6 in usa spec with all the gubins on was 2.5 to 3.5Co you wont get anywhere near that on a std Uk mk2 engine spec maybe 4 to 6 is reasonable , if you want it to run ok.. I dont see any figs for HC either, Dig an extract of thd MOT requirements / vehicle age for CO or just visual pete Link to comment Share on other sites More sharing options...
Darren Groves Posted October 31, 2016 Author Report Share Posted October 31, 2016 Thanks Pete. The CO was reading 1.71% and the MoT tester said that was about right, but seemed too low to me. I always used to aim around the 3% for my Herald. I only got him to measure it to give me an idea of where the carbs were at, it wasn't done as part of the MoT just while it was there. Will richen it up a bit to see if it runs any better. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now