roadster63 Posted May 15, 2017 Report Share Posted May 15, 2017 Hi (again) I need to fit a rear child seat to the Vitesse. I think a 3 point static would work ok, Any advice on how/where to mount? Cheers Link to comment Share on other sites More sharing options...
TomL Posted May 15, 2017 Report Share Posted May 15, 2017 Hi roadster63, if it's a convertible, you will struggle with the top fixing (at shoulder level) as there is nothing structural on the car at this point. If it's a saloon, I imagine you can use the rear deck for the top fixing. A good spreader-plate will be essential. Tom 1 Link to comment Share on other sites More sharing options...
dougbgt6 Posted May 16, 2017 Report Share Posted May 16, 2017 The GT6 inertia reel belt uses the old static mounting point to elevate the belt. So the belt is at an angle of perhaps 30 degrees to your shoulder. This works fine, the belt doesn't have to be horizontal and you can put a fixing point lower down, but as said a spreader plate will be required. You normally get spreader plates if you buy a kit, from the club shop. Link to comment Share on other sites More sharing options...
Pete Lewis Posted May 16, 2017 Report Share Posted May 16, 2017 Also places like merlin moter sport and car builder solutions show them for a few £ Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now