Compatability of Delco red rotor arm and optronics

[Waynebaby]

Hi All,

If like me you have a Delco dizzy with a Lumenition Optronic set up, DO NOT try fitting the red rotor arm from Accuspark. The red rotor arm has a slightly different moulding profile on the underside, and when it sweeps round this extra bit of material clouts the photo-sensor assembly with predictable results.

Guess how I know! I will be calling Accuspark tomorrow.

Wayne

[Colin Lindsay]

It may not be Accusparks fault, as if they supply an item for a standard setup, if you cause damage by using it with something else, it falls back on you. 

I use the red SimonBBC units, they're good and most importantly stay on!

[AidanT]

10 hours ago, Colin Lindsay said:

use the red SimonBBC units, they're good and most importantly stay on!

There are some really nasty "cheap" produced ones out there for delco dizzys to I was lucky that when mine came off it did no real damage 

I now remember to make sure they fit tightly 

Aidan 

[Waynebaby]

11 hours ago, Colin Lindsay said:

It may not be Accusparks fault, as if they supply an item for a standard setup, if you cause damage by using it with something else, it falls back on you. 

I use the red SimonBBC units, they're good and most importantly stay on!

Hi Colin,

You make a good point but I'll call Accuspark anyway just so that they are aware of the issue.

Wayne