Weber dimensions

[DrKai]

Does anyone have triple webers on a 6 pot and could measure the distance from head to end of trumpet for me please?

Thanks

Kai

[Guppy916]

HI Kal, from the inlet face to the end of the trumpet 290mm, these are on my MK3 GT6

[DrKai]

Thanks guppy. You'll see the measurements in use when I start chopping up my bulkhead

[Guppy916]

I only had to relive my bulk head for the rear trumpet,

[DrKai]

things guppy i think the 6 inch engine move back might need more than a little relieving tho 

[Guppy916]

Yep my engine is in the original position'ish

Edited June 14, 2018 by Guppy916
forgot photo

[KevinR]

All the cars I’ve seen with the engine set back 6” have used PI or other injection systems as they don’t require as much of the bulkhead to be cutaway.  There won’t be much left if you have clearance for the Webber and trumpet and air flow 

[DrKai]

thats a beaut guppy. kev there wont really be anything left of the bulkhead above the body mounts it seems bar a wiper motor on the drivers side and a header tank on the passengers everything else will be elsewhere. That's the plan at least trying to iron out all the creases before any chopping starts...