saxplayer Posted August 22, 2014 Report Share Posted August 22, 2014 I suspect whoever recondition the cylinder head (gt6 mk3) got it wrong with reference the valve guides as the engine burns oil intermittently. It did have the mod to supply oil to the rear of the rocker shaft, i took it off which made a big difference. Can any one direct me to a supplier of a set of valve seals. I know they where not fitted originally but they may be an easy solution. Any thoughts shaun Link to comment Share on other sites More sharing options...
Darren Groves Posted August 22, 2014 Report Share Posted August 22, 2014 Canleys do them http://www.canleyclassics.com/searchforapart/?desc=VALVE%20STEM%20OIL%20SEAL%20(INLET%20ONLY) Link to comment Share on other sites More sharing options...
damson Posted October 31, 2014 Report Share Posted October 31, 2014 Rimmers have this comment and sell the seal http://www.rimmerbros.co.uk/Item--i-GRID008189 Derek Link to comment Share on other sites More sharing options...
Pete Lewis Posted November 1, 2014 Report Share Posted November 1, 2014 just be aware that getting stems that need some lubrication too dry will end up with a bigger problem of seizing, there has to be some clearance just not oval or excessive, youve made the right move dumping the 'spawn' also check the breathing pete Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now