Captain Posted May 9, 2015 Report Share Posted May 9, 2015 I'm trying to dismantle my 1973 Mk 3 GT6 rear suspension (part of my total restoration of the car). Everything is off the car but I can't budge the long bolts which pass through the rubber bushes and steel inserts that connect the vertical link to the wishbone. I also can't move the long bolt that passes through the vertical link that holds the brake pipe bracket on one end and rear shock on the other. I suspect the bolts have corroded into the inserts/bushes. I've soaked the vertical links / wishbones in diesel for 10 days, applied heat but the bolts won't budge! Has anyone else found this problem? Can anyone suggest what I need to do to get the bolts out and free the parts. I suspect they might need pressing out which would mean taking them to an engineering workshop. Help needed! Link to comment Share on other sites More sharing options...
GFL Posted May 9, 2015 Report Share Posted May 9, 2015 The Long bolt seizing is a common problem Your GT6 must be one of the last to be fitted with Rotoflex type suspension, I thought they changed to the Swing spring suspension in 1972? If you have an Angle grinder fit a thin cutting blade and carefully cut through where the trunnion bushes are adjacent to the Vertical link (Goggles and gloves a must!) If you haven't got a grinder a hacksaw and a decent blade will get it cut. harder work though the remains should knock out of the Wishbone, A pillar drill and the right size drill bit should drill out the remains of the bolt in the vertical link? I left the bolt in that holds the damper on my car? I've drilled and tapped for a grease nipple on the vertical links on my Mk2 Vitesse and give it a few pumps with an Oil gun when I oil the front Trunnions every year to stop it seizing again Link to comment Share on other sites More sharing options...
Captain Posted May 10, 2015 Author Report Share Posted May 10, 2015 Thanks for the advice about the bolts Gary. I too have been a bit confused by this car. Its chassis number according to the commission plate and reg documents is KE14585 so would be an early Mk3 (rotoflex). It was first registered on 04-01-1973. Any thoughts??? Andy Link to comment Share on other sites More sharing options...
dougbgt6 Posted May 10, 2015 Report Share Posted May 10, 2015 Here's an informative list which includes GT6s: http://www.triumphspitfire.com/historyG3.html Non rotoflex was from February 1973, I know, I have one! KE14585 indicates 1972 manufacture but according to this list the last 1972 was KE13453. Odd! I would get a heritage certificate. Link to comment Share on other sites More sharing options...
Captain Posted May 10, 2015 Author Report Share Posted May 10, 2015 Thanks for this info Doug, Something doesn't quite add up and it's becoming a bigger mystery! Where would I get a heritage certificate from and how? Cheers Andy ps If anyone can add to the original post I'd be grateful. Link to comment Share on other sites More sharing options...
dougbgt6 Posted May 10, 2015 Report Share Posted May 10, 2015 Here's a link to the heritage certificate site. It costs money but, the dvla accept what they say as true. http://www.heritage-motor-centre.co.uk/store/heritage-certificates-and-archive-services/heritage-certificates/car-traced-with-chassis-number.html My car was registered 04/73, the HC will tell you the date of manufacture, mine was 02/73. The number plate immediately following mine was an identical car registered the same day but manufactured 11/72! The last GT6s were manufactured in 11/73 but there are many with 74 plates and a few with 75 plates. Link to comment Share on other sites More sharing options...
Captain Posted May 10, 2015 Author Report Share Posted May 10, 2015 Many thanks Doug. Very interesting. I will apply for a Heritage Cert. I'd really like to know more about the cars history anyway. Link to comment Share on other sites More sharing options...
Clive Posted May 11, 2015 Report Share Posted May 11, 2015 Unless you REALLY want to get the shock bolt out, I would leave it well alone. But Gary is correct, it is "normal" to have to drill the trunnion bolt out, a press will rarely do the job. But make sure it is done accurately, I have seen a few where the hole has not been correctly aligned, up to a bolt hole out (but the remains of the old bolt means it looked OK at first glance, but I wouldn't want to use it) Link to comment Share on other sites More sharing options...
Captain Posted May 11, 2015 Author Report Share Posted May 11, 2015 I need to get the shock bolt out because the brake pipe bracket which is welded onto it is bent and out of shape. I could see if I can straighten the bracket but I guess drilling is the real answer. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now