Robin Posted June 22, 2020 Report Share Posted June 22, 2020 Just found that my brake master cylinder is leaking so have ordered a new one from Canley. Is there a particular order that the brakes should be bled? Link to comment Share on other sites More sharing options...
Clive Posted June 22, 2020 Report Share Posted June 22, 2020 I could be wrong, but always thought it was the longest pipe run first. And work back to shortest. Link to comment Share on other sites More sharing options...
Colin Lindsay Posted June 22, 2020 Report Share Posted June 22, 2020 I always did it starting furthest from master cylinder as the pipes run, then work back. The pipework crosses from driver's side to passenger side so although the cylinder is on the driver's side the pipework crosses over and so the two driver's side brakes are actually further away in pipework terms. That would mean - on UK cars - driver's side rear, passenger side rear, driver's side front then passenger side front. Link to comment Share on other sites More sharing options...
Robin Posted June 22, 2020 Author Report Share Posted June 22, 2020 Great - thanks for the advice Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now