BobP Posted August 21, 2020 Report Share Posted August 21, 2020 I have fitted a new main loom,starter solenoid and Lucas starter,when I try to start the starter just makes a whirring sound and doesn’t turn the engine. Any ideas please Link to comment Share on other sites More sharing options...
Colin Lindsay Posted August 21, 2020 Report Share Posted August 21, 2020 It sounds like the starter is not engaging the flywheel teeth; you may need a spacer or if you have one already fitted, you may not... have a look at where the Bendix gear is in relation to the flywheel (make sure it moves freely, a little graphite dust will lubricate it, not grease) - and see if you can adjust the position any. Link to comment Share on other sites More sharing options...
BobP Posted August 21, 2020 Author Report Share Posted August 21, 2020 (edited) Colin I checked workshop manual and spacer is required with Lucas starter .previously I tried to fit a high torque starter with and without spacer same problem .just whirring sound? Edited August 21, 2020 by BobP Missed the spacer out of text Link to comment Share on other sites More sharing options...
Steve P Posted August 21, 2020 Report Share Posted August 21, 2020 You need the spacer with both,you don,t need the bulkhead mounted solenoid with the hi torque one,i would try it on the bench with jump leads to make sure the starter is working and then check the ring gear. Steve Link to comment Share on other sites More sharing options...
BobP Posted August 21, 2020 Author Report Share Posted August 21, 2020 Steve the hi torque starter was returned to the manufacturer for checking they said it was ok,the Lucas starter is brand new.? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now