martyn wright Posted October 27, 2020 Author Report Share Posted October 27, 2020 Hi Unfortunately the photos are not the best! Photo 1 - From the B Post to the first screw was 50mm, From screw 1 to screw 2 was 200mm then from screw 2 to screw 3 and onwards the is 170mm between screws! I dont know why it was 50mm then 200mm?? Pic 2 shows 170mm and this carried on to the end (screw 6)! Pic 3 - X shows screw holes on edge of inner plinth and 2nd X shows door rubber seal. It might be an Idea just to setup the Rail and using your own judgement drill the holes? I filled the holes with white powder for a better picture?? Link to comment Share on other sites More sharing options...
Dave1360 Posted October 28, 2020 Report Share Posted October 28, 2020 That's great Martyn, thanks very much. I'll mark it up to match yours and see how it all looks. I must admit I'd be tempted to even up the 170/200 gaps though. Cheers, Dave Link to comment Share on other sites More sharing options...
martyn wright Posted October 28, 2020 Author Report Share Posted October 28, 2020 Hi Dave! Yes adjust the gaps! I have never had carpet rails on the car but now that I am restoring her, I have found a second hand set! to finish it off. Cheers Martyn Link to comment Share on other sites More sharing options...
PeteH Posted November 2, 2020 Report Share Posted November 2, 2020 On 26/09/2020 at 14:38, martyn wright said: Hi Paul ! They are like Gold Dust! Tried loads of places including Breakers! Try "Chick Doig" it cost me £10. You tend to get the Regulator without the pivot? Its 30mm length, Hope this helps I am surprised?. I would not think it was beyond the capabilities of someone with access to a lathe, to produce a small batch?. Or even a "one off"?. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now