Kevin Osborn Posted January 19, 2021 Author Report Share Posted January 19, 2021 On 15/01/2021 at 18:34, Pete Lewis said: this design is out there , its not uncommon . but not close to the original over the years i have found SU get upset by a lumpy idle ??? you need to measure the output pressure if you can unfortunate but many aftermarket pumps have been shown to exceed the 2.5psi max so buying another may not improv i take it this is 1300 using a short lever pump and NO plastic spacer pete Have ordered a fuel pressure test gauge so I can test the output. I need to establish if it’s too high before I think about a new pump or pressure regulator. Kev Link to comment Share on other sites More sharing options...
Pete Lewis Posted January 19, 2021 Report Share Posted January 19, 2021 thats a good plan Pete Link to comment Share on other sites More sharing options...
Kevin Osborn Posted January 21, 2021 Author Report Share Posted January 21, 2021 So fuel pressure gauge arrived and I tested the pump - just under 3psi. A little more than the recommended max of 2.5 but would this be enough to cause overflow? As Sod’s law would have it, the carbs are behaving themselves at the moment but likely to play up when least needed such as when waiting at the lights...... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now