ahebron
-
Posts
968 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Store
Events
Posts posted by ahebron
-
-
23 hours ago, Bordfunker said:
..........
Mark, many thanks for the offer, but Eastbourne might be a bit of a trek, but thanks all the same.
.........
Karl
You reckon?
-
1
-
1
-
-
To me it looks like a pivoting catch like in a soft top frame or bonnet.
But that is just a stab in the dark -
Assuming that the airbox I have fitted to my 1965 Vitesse 6 (150CD Strombergs) should it have 3 or 4 holes under the rear carb filter?
I only assume this is the correct airbox as I have many Triumph airboxes pass through my hands and have no idea if what I ended up fitting is the original.
TBH it makes no difference to me as long as it works well. -
On cars where i have relocated the battery to the rear I also run the neutral/earth cable from the battery up to the engine preferable a starter motor bolt.
Then to the bulkhead earthing point.
I would not rely on the chassis/body as a return path, they might be steel but many years of corrosion and the fact these cars are bolted together bits doesnt help.
I use welder cable from my electrical wholesaler.-
1
-
-
From past experience with saloon and convertible Vitesse just like a hitchhiker (HHGTTG) a towel is a vital part of the kit carried in the car
-
Hi Paul
Could you try use your incorrect door seals for the boot?
-
Maybe cup washers like cups come in different shapes❓
-
Or in my case when you have reinstalled the head and all the bits and bobs that go with it, fill the engine with coolant and notice a running water sound from the rear of the engine. Engine reconditioner forgot to replace the welsh plug and I never noticed till it leaked.
Lesson learnt check the parts on pickup. -
Modern wheel nuts can take a lot more torque than the spindly Triumph ones.
-
But nothing quite like dropping the change on an Eaton 2 speed diff while driving through a tunnel and having to stop to reengage.
Company I work with has a Scania with one of those boxes, problem is not many of us can drive it and as I do so rarely it takes a while to get re-accustomed.
Doesnt help that leaving the yard is narrow residential then a main road with traffic crawl climb up to a narrow tunnel with one lane each way, forget looking in the mirrors its all about what coming the other way as 2 trucks just scrape past each other-
1
-
-
I recall grinding down the side of pads back in the late 80s for my Spitfire Mk4 6 fitted with Mk2 Vitesse front brakes.
And I have posted in the past about getting a set of 1144 pads to fit a Vitesse 6, they dont list them for it but the same caliper is used on a Lotus something or other.
-
Before I bought a can of battery terminal spray I used to coat terminals with vaseline than run a hot air gun over them to melt the vaseline on the joint.
-
It took me a reread to work out that you are not doing a desmodronic valve system but replacing the rocker shaft spacer springs.
Must be time for bed. -
My personal interpretation of performance filters (size for size) is the only way to get more air through is to have bigger 'holes' which allows bigger 'dirt' particles.
On a slightly different subject this is interesting about oil filters. -
Torque to yield on modern vehicles scare the bejesus out of me.
-
IIRC some where I read about an Audi one fitting a Vitesse/Herald. Obviously not bought at Audi prices but sourced secondhand.
-
Back in the 1990s I owned a Lancia Delta HF Turbo (carb model) which was a very fast comfortable car. Probably the most expensive car I ever owned if we convert money know to back then.
I had parked outside a mates house on slight hill.
Knock on the door from the bloke over the road asking if someone at the house owned a red Lancia as it was parked in his front fence.
Handbrake had failed and the car had slowly rolled down the hill into his garden.
No damage to the car but a broken fence which I repaired promptly as the owner was police officer
-
The first truck I drove was a Bedford J when i was doing my time at the local power board.
A company I worked with had a TM with box body that we drove all over the country, I took it on its last trip for the company and it was just a cab and chassis by then.
It had the Detroit 671 2 smoke engine and a road ranger ( cant remember if it was a 13 or 15 speed, definitely not a 9 or 18) with out a body it was brisk rig. -
I believe a Bond Bug has the same splines
-
After fannying about with starlock washers I found that a 4mm e-clip will work on the fixing with the rubber spacer that holds the headlight retaining ring to the bowl and is easier to remove if need be.
-
8 hours ago, Bordfunker said:
Is that a rare Forward Control Herald I spy?😉
-
Interesting about the cataracts ops restoring vision.
My vision went bad after having my appendix removed 5 years ago when I was 52.
Never having been admitted to hospital or under a general anaesthetic till then my eye muscles decided enough was enough and you will have to wear glasses to read.
Therefore if they restore my appendix will my vision improve? -
I have 2 sets of reading glasses in the car, 1 in my motorbike, 1 in the workshop, 2 in the lounge, 1 by the bed, 1 in the 'reading room' and 1 in my work tool kit.
Just have to remember top remove the pair before moving location
-
On 20/05/2022 at 01:03, Pete Lewis said:
that a coincidence i also have one of those
was about to blow the dust off
Pete
I imagine Compo wouldn't have objected to Nora doing that.
GT6 & Vitesse WSM
in Tools
Posted
http://vitessesteve.co.uk/Servicemanuals