Jump to content

Woody2000

Forum User
 View Profile  See their activity

  • Posts

    153

  • Joined

  • Last visited

 Content Type 

Everything posted by Woody2000

  1. Woody2000
    Have tried this Colin no movement at all tried heat and plusgas as well Amy more ideas ??
  2. Woody2000
    Trying to replace the track rod ends by hook or crook
  3. Woody2000
    Hi Tony taken some photos below hope this shows the problem .Have previously cut the steering arms off to be able to dismantle the rest of the suspension!!!!!! maybe should have undone them before hand 🥺hind sight is a wonderful thing
  4. Woody2000
    Update need to get a bigger spanner for the inner nut not sure of the size ?? If not I suppose I could cut the locking nut off them the track rod end will come off ???
  5. Woody2000
    All sorted I know which one is which thanks for your help
  6. Woody2000
    The adjuster nut end is the other end easier to undo then sort it out on a bench ??
  7. Woody2000
    It’s power steering Pete
  8. Woody2000
    I am now replacing the front suspension on a Truimph 2000 mk 2 not sure which side is left and right on the steering arms is drivers side lhs or rhs Also not sure where they go back onto strut think one end goes on back of stub axle then not sure any ideas 💡
  9. Woody2000
    Hi I am trying to change the track rod ends on a Truimph 2000 mk2 i have had to remove the track rod ends with a grinder but I can’t undo the nut I have tried heat and plusgas Any ideas what to do ???
  10. Woody2000
    Thanks for all your help and answers so to get the strut off with carrier ,calliper etc undo the top three bolts at top then not sure what else to undo to get this off haven’t really done this but am gonna try !!
  11. Woody2000
    Quick update use a blowtorch bottom nut came undone but top one still not out cant get anything behind it at all tried everything so I now think I might have to take the whole leg off is this quite easy ??? Never done it !!!
  12. Woody2000
    Quick update use a blowtorch bottom nut came undone but top one still not out cant get anything behind it at all tried everything so I now think I might have to take the whole leg off is this quite easy ??? Never done it !!!
  13. Woody2000
    Firmly bolted up still
  14. Woody2000
    Trouble is can’t get anything behind the head to lever it
  15. Woody2000
    Yes Colin so do I !! Top one turns quite freely both ways bottom one have tried wd40 etc over a few days will try some heat thanks for your help
  16. Woody2000
    Ok thanks guys for all your help
  17. Woody2000
    Sorry 1973 Mark 2
  18. Woody2000
    Got one side off ok started on the other side bolts stuck fast !!! got the top one loosened but now it won’t come out just turns both ways without coming out any ideas how to get it out and what damage bottom one won’t turn at all Any ideas 💡?? Thanks Mark
  19. Woody2000
    Hi am starting to get my project up and running have got the engine running after 10-12 years in a garage it has a high lift cam fitted so wondered if anyone knew what the timing should be ??? Have it set at about 25 degrees BTDC at the moment runs ok ?? thanks Mark
  20. Woody2000
    Hi Tony just ordered one thanks 🙏
  21. Woody2000
    Hi just asking a few questions regarding my 2000 which I have stripped the back brakes and cleaned the front after not being on the road for 10/12 years I was going to replace flexible hoses all round ,new cyclinder on back wheels and buy a calliper repair kit but discs are £82 on Rimmers each.Do any other work as well ?? or other places to try ?? Normal hoses or braided ones ?? Thanks Mark
  22. Woody2000
    Thanks again Pete
  23. Woody2000
    Thanks Pete that’s a great help
  24. Woody2000
    It's a 1973 Truimph 2000 mark 2
  25. Woody2000
    Hi have taken the head off and now putting it back I have some large wide washers and some narrower ones can't remember which ones go where can anyone help
×
×
  • Create New...