Danwedges Posted April 13, 2018 Report Share Posted April 13, 2018 Okay so after adjusting the brass arm for the overdrive to take out the slack I can now manually activate my overdrive with the back wheels in the air idling in 4th gear by pulling on the arm but my solenoid will not pull it but will hold it if switched on and pulled over manually if you understand what I mean? Is this a faulty solenoid? Would a new solenoid have the strength to pull the arm on its own? Or are there other issues at play here? Link to comment Share on other sites More sharing options...
Pete Lewis Posted April 13, 2018 Report Share Posted April 13, 2018 this sounds very faulty solenoid, if you have amulti meter that will measure the amps add it in line a see what current you are pulling but its fairly clear the pull in coil has failed as it wont 'pull in' on its own. as said 10+ amps pull in 0.5amps when holding Pete Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now