richhl Posted August 30, 2019 Report Share Posted August 30, 2019 Hi, I'd appreciate any photos and/or information on the routing and clips for the fuel line for a Mk2 GT6 (from fuel pump to tank) - Replacing mine, and I have realised I should have taken clearer photos - also this is not covered in the official or other workshop manuals. Thanks in advance, Richard. Link to comment Share on other sites More sharing options...
Colin Lindsay Posted August 30, 2019 Report Share Posted August 30, 2019 If my Mk1 is anyway similar it just runs from the tank along the outside of the main chassis rail, between floor pan and chassis through the outriggers and to the front where it has the addition of a rubber pipe between the bulkhead and the outrigger to the pump. I can try for photos later? Link to comment Share on other sites More sharing options...
dougbgt6 Posted August 30, 2019 Report Share Posted August 30, 2019 On my mk3, from the tank to the side of the chassis in the passenger side rear wheel arch. Mine has a short rubber joint there and then follows the side of the chassis to the front and another rubber joint, same as Colin's. Doug Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now