NickT Posted September 14, 2019 Report Share Posted September 14, 2019 Hi all. My Mk2 Vitesse has suddenly started to misfire at around 2-3k revs when under load. when ticking over it sounds fine. Its now running Accuspark dizzy,coil and leads with new plugs. has been running really well up to last week.Timing seems spot on, ive now changed the diaphrams in both stroms. pulling the choke out seemed to make it worse and stalled it. It does seem to feel like a fuel issue. Any info or ideas will be appreciated. Bit of a pain as i use her everyday for work. Cheers Nick Link to comment Share on other sites More sharing options...
Paul H Posted September 14, 2019 Report Share Posted September 14, 2019 1 minute ago, NickT said: Hi all. My Mk2 Vitesse has suddenly started to misfire at around 2-3k revs when under load. when ticking over it sounds fine. Its now running Accuspark dizzy,coil and leads with new plugs. has been running really well up to last week.Timing seems spot on, ive now changed the diaphrams in both stroms. pulling the choke out seemed to make it worse and stalled it. It does seem to feel like a fuel issue. Any info or ideas will be appreciated. Bit of a pain as i use her everyday for work. Cheers Nick Hi I’m running same system on my mk2 vitesse and had similar issues , the screw holding the electronic points in the dizzy had loosened and moved towards the magnet and was catching just a fraction . Just enough to cause misfire . Readjust and tighten and all ok for me Paul 1 Link to comment Share on other sites More sharing options...
NickT Posted September 14, 2019 Author Report Share Posted September 14, 2019 Hi Paul. Thanks for that i,ll check that out and let you know. Didn't think to check in cap as its brand new set up. Cheers Nick. Link to comment Share on other sites More sharing options...
Pete Lewis Posted September 14, 2019 Report Share Posted September 14, 2019 did it do any missfires before you changed all the parts ?? have to say accuspark has a mixed reviews of playing up some are fine some are hopeless under load sounds more plug related , read the posts about plug problems Pete Link to comment Share on other sites More sharing options...
NickT Posted September 14, 2019 Author Report Share Posted September 14, 2019 Hi. Just checked in dizzy. The module was all good, but the advance rod had managed to unhook itself from the plate. Been for test run and all fine and dandy again. Thanks for the heads up Paul. Had no issues with this set up till now. will see how it goes. Cheers again till next time Nick 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now