david lewis Posted May 25, 2015 Report Share Posted May 25, 2015 hi all, would fitting a courier spring make much difference to the ride and handling ?,seems cheaper than a canley kit. cheers Link to comment Share on other sites More sharing options...
GFL Posted May 25, 2015 Report Share Posted May 25, 2015 Have a look at the adjacent post entitled Bond Spring for comments on the Courier spring? Link to comment Share on other sites More sharing options...
Pete Lewis Posted May 26, 2015 Report Share Posted May 26, 2015 When first got the Vit6 back in 2003 we fitted a decambered spring from moss to effect a better camber this was hopeless and went up the tip, weak, soft, next was a swinger kit, this was on a saloon so higher centre of gravity, we ended up withb10deg neg camber and the shockers bottomed out, so no up travel, even with the crap ride and thicker arb body roll was hopeless, roundabouts like a boat ....this was removed and despite making shorter shockers just became even lower...no good with 4 up and all the nickpic stuff in the boot next a courier unit from Bill at rarebits4classics and some new spax shockers. and a 1"drop plate to get the camber to 0 and now on rails in comparision to the previuos trials most important you reset the rear toe static laden. (150lbs on each seat or 4 up) Makes good predictable and very flat handling pete Link to comment Share on other sites More sharing options...
Clive Posted May 26, 2015 Report Share Posted May 26, 2015 Are courier springs available again? I fitted one to my herald estate, and used a 1" lowering block. That was used extensively for road rallies and autosolos, and it was brilliant. I removed the front ARB at the same time (couriers were not fitted with ARB's) which made evrything handle sharply and predictably. The spring is better suited than the swingspring conversion, though that can work as long as you do not intend carrying people or heavy luggage. Link to comment Share on other sites More sharing options...
Pete Lewis Posted May 26, 2015 Report Share Posted May 26, 2015 Dont think bill is sourcing any more think last order was for ten and they all sold Guess its all down to supply/ volumes / cost to be viable pete Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now