Cable specification

[Paulfc]

Hi, 

Will someone please advise me as to the the general spec for the cable used in the harness as I need to order cable to make repairs. Also, I’ll be grateful for any suggestions as to suppliers.

thanks,

Paul

[Anglefire]

I’ve no idea what the original spec for the wiring is, but I’d use thin wall cable.  
 

Something like what you can get from here. 
https://www.autoelectricsupplies.co.uk/mobile/product/70/category/114

i can’t remember if I’ve bought from them, but they look ok as far as I can see. 
 

[yorkshire_spam]

AES as @Anglefire says, but also vehicle wiring products, 12volt planet, autosparks.

Thin wall is good stuff, allows you to match the outer diameter of the original but at a MUCH higher current rating.

In terms of spec, if you pick the thin wall that's the same OD as whats there I'd bet it's over-spec with a good safety margin UNLESS you are planning to up rate headlamps etc. Really strictly speaking you should calc the current and then pick something well above that.

[Paulfc]

Thanks guys, much appreciated.