pirate Posted May 4, 2020 Report Share Posted May 4, 2020 Hi I've just fitted twin SU's to my 13/60 and realised that it doesn't have the extra downward outlet as the single carb manifold. So I presume that I need to fit a t piece in the hose someone has said that it should have a restrictor in it? I've ordered a 15mm equal t piece do I need to fit a restrictor in one of the outlets. Any info appreciated. Link to comment Share on other sites More sharing options...
NonMember Posted May 5, 2020 Report Share Posted May 5, 2020 I think you should be OK. The restrictor is definitely needed in the heater bypass but it's normally present in the tee off the return pipe to the pump (along the block below the manifold). The T-piece was integral to the inlet manifold on later Spitfire twin-carb setups, so perhaps you have an early (Mk3) manifold? Link to comment Share on other sites More sharing options...
Pete Lewis Posted May 5, 2020 Report Share Posted May 5, 2020 I guess if the heater lacks flow you could make a simple plug in the hose with a 1/4" hole to reduce bypass flow Pete Link to comment Share on other sites More sharing options...
pirate Posted May 5, 2020 Author Report Share Posted May 5, 2020 Thanks guys I suppose run it and see can always make something up later. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now