Colin Lindsay Posted March 6, 2021 Report Share Posted March 6, 2021 Guys, I've got to ask just for peace of mind. It looks obvious, I'm nearly 100% sure I'm correct but there's always a catch in this life and I just want to make sure. I've bought some Polybush front trunnion bush sets for the cars I'm currently working on. Just confirm: that's it - just two bushes and a tube. I don't need those inner and outer metal cups around them - that's it? They take the place of the entire thing, not just the two blue plastic bits inside the metal covers? I thought I'd better ask before I go ahead. Link to comment Share on other sites More sharing options...
Anglefire Posted March 6, 2021 Report Share Posted March 6, 2021 That is what I understand too. But don’t know 100% Link to comment Share on other sites More sharing options...
johny Posted March 6, 2021 Report Share Posted March 6, 2021 yes thats correct, the sleeve should be stainless so doesnt need the seals of the original design. When you assemble it check that the sleeve is slightly wider than the bushes installed in the trunnion so that when bolted up the bushes will still be free... Link to comment Share on other sites More sharing options...
Colin Lindsay Posted March 6, 2021 Author Report Share Posted March 6, 2021 Thanks Johny. It seems so obvious that there had to be a catch... I'll fit them tomorrow so will look out for the length of the tube too. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now