Jump to content

martyn wright

TSSC Member
 View Profile  See their activity

  • Posts

    653

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by martyn wright

  1. martyn wright
    Hi! I have contacted Canley, Rimmer and Paddocks and they no longer have any 704418! would a alloy one suffice? B&Q or somewhere?
  2. martyn wright
    HI! Excellent all I now need is the Header Rail to hold in the Rubber! Its the same as the retailers for the sides.
  3. martyn wright
    Hi! Don Hoods just emailed me a copy of the Instructions? Not a lot of use!! I'm only able to do small jobs on the car as I have been ill! My concentration is minimum at present. so looking back through the "Courier" Mags is not an option. Its taken me 3 days to fit up the Hood Frame LOL!
  4. martyn wright
    Hi All! The Retainer Screws for the Alloy Weather and Rubber strip are showing as PTO 453 but are discontinued? But there is no info on what Size etc they are? Can anyone help please? Cheers Martyn
  5. martyn wright
    Hi! Mike! Is there supposed to be a Rail also inside that holds the Rubber Header Seal? If so I do not have that either? Since my last message I now have the Plastic Header finisher! Cheers Martyn 20230509_161827 (1) Hood Header Rail with Chanel (1).mp4
  6. martyn wright
    Hi All! Back to the fitting Instructions! Has anyone out there "Had Instructions" when they purchased a New Hood??
  7. martyn wright
    Yep! I also had to take the Hood Frame apart! Rub down and Paint it! Clean and white grease the movable parts and bend the damaged/bent parts back in line. Drill out the damaged screws in the Header Rail and fit new. Lol! This Vitesse hasn't been on the road since 1985! Put Windscreen in this morning!
  8. martyn wright
    Hi! Anyone have a photo of the Header rail Plastic seal and how it fits onto the hood??
  9. martyn wright
    Hi! I purchased New Hood from TSSC! Are the Instructions supposed to be in the box? Or Don't they come with instructions? ( The Popers where missing?) Cheers Martyn
  10. martyn wright
    Hi All! I have emailed "Chic" so just waiting an outcome!
  11. martyn wright
    Thanks Gary! I don't even know what one looks like! Again my Hood and Frame disappeared when it went into storage at Hereford, so I managed to get another frame but found that this piece was missing? I need to get a photo of one from somewhere to see if I can improvise! Cheers again!
  12. martyn wright
    Hi! I am looking for a Finisher Hood Header Rail 609602?? Cheers
  13. martyn wright

    Hi!  Did you ever find a 609602 Finisher Roof Header Rail?  As I am now looking for one?

  14. martyn wright
    Thanks! Just picked a set up from the store!
  15. martyn wright
    Vitesse 1600/6 Well I managed to get a Used Hood Header Rail! BUT! the slotted screw have been drilled then the tops ripped off?? What is the best way to get the screws out as they are able to move back and forth within the slot?
  16. martyn wright
    Got mine 2 years ago from Canley Classics!!
  17. martyn wright
    Hi! My 1966 1600/6 had the small counter sunk screws also! as shown above! I have not seen those clips tho! As the screws no longer fit the hood frame so, I am thinking of using the 1/8" pop rivets
  18. martyn wright
    Hi! Try Ally! At East Kent Trim - Ashford, Kent 01233 500280?
  19. martyn wright
    Thank You Kind Sir!
  20. martyn wright
    Hi All! I have managed to get a Photo of the "Header Black Facia Board" where as you can see the Hood Catches screw into? I need the "Facia Board" or a old one I can take a Template from?? Cheers Martyn
  21. martyn wright
    Okay! Still no answer from Spitbitz! There's a well worn pale blue herald on ebay and on close up I can see that it has a black facia on the header rail! ?? That is what Im after! Can anyone help!! Cheers Martyn
  22. martyn wright
    I Found one Thanks all!
  23. martyn wright
    Sent an email to Spitbitz asking for a board!
  24. martyn wright
    Hi! The Hood Frame Facia "Board" that fits into the Hood frame (563132)The Securing Catches fit onto is missing on my Vitesse 6! does anyone know where I can get one or get a Template please? Cheers Martyn
  25. martyn wright
    Hi! I saw the same type? on ebay yesterday!!
×
×
  • Create New...