Where is the Hazard Light unit?

[StevieB]

I need to replace my hazard light unit on my GT6 MK3. Canley Classics have supplied a unit with two terminals, but the Workshop Manual shows three connections. On closer inspection the missing connection is the one that drives the dashboard light, so I guess this is not such a big deal.

 

So, now I need to change it. Struggling to find it though! I have a little round can, but cannot find something similar. Can anyone give me a clue as to where it might be?

 

Cheers

 

Steve

[dougbgt6]

Is that the one that bolts on the back of the speedo? Or the one next to the horn relay on the bulk head near the battery? I can never remember which is which!

[Alan C]

Stevie

 

The hazard flasher unit is mounted on the bulkhead next to the horn relay-LHS of the battery compartment. It's 12v supply is piggy backed off the horn relay. It's identical to the flasher unit except for being beefed up electrically to cope with four indicators rather than two.

The unit should only have two terminals. It's function is solely to supply an intermittant 12v supply to the dashboard master switch. The warning light is supplied from the master switch as well.

The unit on the back of the speedo is the voltage stabiliser.

 

Cheers

 

Alan

[dougbgt6]

Voltage stabiliser! Of course it is!  Sorry, but I got the next to the horn relay right.

[Pete Lewis]

Doug, Excuses are allowed on the old age thread !!!!!!

 

would you like to loan my new slippers ( with pom pom)

 

 

Pete