Vinyl for Rear Wheel Arch - Triumph Spitfire 1500 1980

[Pettifordo]

Can anyone recommend where to by some vinyl that I can cut to shape for the rear wheel arches and b pillars ?

Thanks

[Pettifordo]

I found some on this site - will let you know how it turns out. - https://aemarket.co.uk

[chrishawley]

If you've not already made a purchase might be worth checking out Park Lane and/or Newton Commercial. Two types of grain for vinyl on Spitfires (fine and coarse) and either of the aforementioned sellers can provide material which is pretty true to the original. I've purchased from both and results have been good.

[mark powell]

I used Martrim  when finishing my Midge. 

https://www.martrim.co.uk/car-trimming-supplies/everflex-vinyl-pvc-hooding.php

[sulzerman]

Try Park lane, reasonably priced and good service. Excellent products!

 Park Lane Classics

47 Park Ln, Bonehill, Mile Oak, Tamworth B78 3HZ

01827 284957

https://g.co/kgs/cKSAnU

[Unkel Kunkel]

This is a bit late, but if you still have your old bits of vinyl covering, hesitate before throwing them out - carefully removed, not only useful as templates  but in the case of the bits that attach to the over the wheel arches, 

I found it to be so much a challenge to replicate  the compound curve despite heat and stretching, and swearing etc. that I ended up cleaning up the original bits ( which now suddenly appeared  fine) and re- fitted them.