Rockape Posted November 7, 2022 Report Share Posted November 7, 2022 So - just noticed that one of the nuts on the exhaust manifold was finger tight. couldn’t find a torque setting in the Haynes manual for this fastener. But then again the dimensions of the casting would appear to prevent any regular socket being used. what to do? Link to comment Share on other sites More sharing options...
Pete Lewis Posted November 7, 2022 Report Share Posted November 7, 2022 dont need a torque just a good hand tight with an appropriate spanner in general 5/16unf 19/21 lbft 3/8 unf 28/31 lbft Pete Link to comment Share on other sites More sharing options...
68vitesse Posted November 8, 2022 Report Share Posted November 8, 2022 Find the two nuts for my exhaust manifold on my Mk1 Vitesse work loose so have fitted lock nuts. Regards Paul Link to comment Share on other sites More sharing options...
Stratton Jimmer Posted November 8, 2022 Report Share Posted November 8, 2022 Should have a split washer under the nut. As Pete says - not much more than hand tight and a pinch with a spanner. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now