rulloyd Posted August 8, 2023 Report Share Posted August 8, 2023 Hi all For my GT6, is it usual to have as much of the spline showing between the rack snd the column, as pic? I fitted it but I can’t recall how much was showing previously! Many thanks for any advice Rich Link to comment Share on other sites More sharing options...
Colin Lindsay Posted August 8, 2023 Report Share Posted August 8, 2023 That's normal; you'll find there's a groove that the bolt runs across, so as long as that's in place it won't pull out. Link to comment Share on other sites More sharing options...
johny Posted August 8, 2023 Report Share Posted August 8, 2023 Have you used the correct 5/16 UNF bolts ie they have an unthreaded portion which makes then a snugger fit in the rack stub groove that Colins mentioned? Link to comment Share on other sites More sharing options...
Unkel Kunkel Posted August 8, 2023 Report Share Posted August 8, 2023 The bolt has to traverse the groove cut into the splined shaft- I recall it being as a very close fitting. Should be fine. Link to comment Share on other sites More sharing options...
rulloyd Posted August 8, 2023 Author Report Share Posted August 8, 2023 Thanks all. Of course, I remember now. Pretty sure I used the right bolt but I probably should check. No problems with steering, just noticed that a lot of spline showing. 👍 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now