ChrisTasmania Posted June 19, 2019 Report Share Posted June 19, 2019 Another question I'm afraid. Difficult to photograph, but the ends of the front valance on my Mk2 Vitesse, take the rivetted aluminium trim, but there is a large gap underneath! I hope the photos taken from below show it, but, is the end of the valance the wrong shape? should there be a 'bump' for the trim to sit on? or a kind of 'top hat' fitting to rivet the trim to? The ends have been rebuilt. But I only replaced what was already there. It all looks fine from above. Again, thanks for the help, Cheers Chris Link to comment Share on other sites More sharing options...
Paul H Posted June 19, 2019 Report Share Posted June 19, 2019 Here’s a pic taken from underneath of my mk2 Vitesse showing the aluminium bumper . Looks like a different profile to yours. Paul Link to comment Share on other sites More sharing options...
68vitesse Posted June 19, 2019 Report Share Posted June 19, 2019 There is a bracket at end of valence the aluminium trim rivets to, utube video Triumph Herald/Vitesse front valence repair shows it. Regards Paul 1 Link to comment Share on other sites More sharing options...
Pete Lewis Posted June 20, 2019 Report Share Posted June 20, 2019 Yes the valence and ally trim are very different shapes , def needs a end brkt to space the trim, I tried to shorten a trim to loose the gap,, dont it doesnt work Pete Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now