DanHookey Posted May 8, 2020 Report Share Posted May 8, 2020 Hi all, I've recently fitted the club hazard light kit to my Vitesse. All was working well. I've now swapped over to LED indicator bulbs and replaced the flasher relay with an LED compatible one as well as replacing the flasher relay in the hazard kit. Whilst the indicators work well, when I pull out the hazard switch the inline fuse (to the hazard switch) blows. Do I need to replace the small bulb in the hazard switch do you think? or fit a resistor somewhere to reduce current? Many thanks all Link to comment Share on other sites More sharing options...
Pete Lewis Posted May 8, 2020 Report Share Posted May 8, 2020 I dont know but the current for LED is very much reduced from filament bulbs so theres no reduction thats sensible sounds more like a wiring fault or a duff LED thats popping the fuse the switch warning lamp is hardly a culprit pete Link to comment Share on other sites More sharing options...
SpitFire6 Posted May 18, 2020 Report Share Posted May 18, 2020 On 08/05/2020 at 12:37, DanHookey said: Hi all, I've recently fitted the club hazard light kit to my Vitesse. All was working well. I've now swapped over to LED indicator bulbs and replaced the flasher relay with an LED compatible one as well as replacing the flasher relay in the hazard kit. Whilst the indicators work well, when I pull out the hazard switch the inline fuse (to the hazard switch) blows. Do I need to replace the small bulb in the hazard switch do you think? or fit a resistor somewhere to reduce current? Many thanks all Suggest you put it back to when it was working & check it still does? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now