Black Cat Posted July 25, 2020 Report Share Posted July 25, 2020 Just received my new heater control valve and it came with a fiber gasket for the flange joint, when I removed the old one it had an ‘O’ ring sealing (Item 78 in the attached) and no gasket. Do I need the ‘O’ ring if I’m using the fiber gasket and if not should I also use some sort of gasket sealer with the fiber gasket? The old ‘O’ looks a bit shot away. Link to comment Share on other sites More sharing options...
Pete Lewis Posted July 25, 2020 Report Share Posted July 25, 2020 O ring type of olive idea is std i feel the gasket will also seal the two flanges ok and add some sealer to make sure , i have when O ring is needed cut down a slice of heater hose to make one rimmers show them https://rimmerbros.com/Item--i-C9928A Pete Link to comment Share on other sites More sharing options...
Black Cat Posted July 26, 2020 Author Report Share Posted July 26, 2020 Thanks Pete. Link to comment Share on other sites More sharing options...
Nick Jones Posted July 26, 2020 Report Share Posted July 26, 2020 The O- ring is used when fitting on a Vitesse or Herald which has no fixed flange on the heater pipe, just a loose flange used to squash the O-ring onto the pipe like an olive. Nick Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now