Jump to content

Choke cable anomaly? on 13/60


Jeffds1360

Recommended Posts

I had noted that my cable had the rubber sleeve and the two clips and had thought they were to protect it from wear on the bonnet.

This morning my outer cable was found to be fractured just forward of the sleeve. Properly broken, you could see where the fracture had occurred. On checking the parts catalogue, I saw the outer is meant to be in two parts, held together by the sleeve and clips. However, mine was not, it was continuous.!!??  Luckily I managed to slide the clips and rubber over the break (after thourorly lubricating the inner) odd this! but handy!

Speaking of chokes, my quadrant is adjusted well but the throttle does not open until over half choke,  is it worn?

Look what I found in the shed! From nearly 50 years ago!

20210202_154301.jpg

Link to comment
Share on other sites

the rubber joint was to  decouple /reduce engine noise into the dash panel

bit of fuel hose and jub clip is a simple replacement if needed 

as most are not a sleeved outer the rain into the heater intake  plenum  makes for hidden inner cable rust /stiff/ fractures  etc 

always worth pulling the inner and greasing it .

Pete

 

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...